Fishman, PRO-LBT-600 Loudbox Artist 120 watts Acoustic Guitar Amp with Bluetooth
120 watts Bi-amplified. 2 Channels with 1/4” & XLR inputs. Dual Effects with Independent Control. 3 D.I. Outputs: Each Channel and Main Mix. Bluetooth® 4.0 Connectivity
- The professional standard for clean, dynamic acoustic amplification at high-volume performances
- 120 Watts, bi-amplified with high-quality drivers
- Two well-equipped channels with dual effects
- Pro connectivity and Bluetooth audio
Loudbox Artist is the professional’s choice for clean, dynamic acoustic amplification at high-volume performances. Whether you perform solo or with a full band, the bi-amplified 120 watts pushes clean volume through an 8” woofer and 1” neodymium soft-dome tweeter. Dual channels offer premium tone control you would normally expect on a pro studio preamp plus feedback-fighting phase and notch filters and phantom power. Both channels can be routed through the dual-effects section to add delay or reverb and chorus. Pro connectivity is made available through independent D.I.s and effect loops and there’s even a set of Aux Inputs and Bluetooth receiver to add backing tracks or set-break tunes.
FEATURES:
- Bluetooth® Connectivity
- 120 watts of bi-amplified acoustic power
- Two mic/instrument channels accept 1/4” or XLR sources
- Input channels feature 3-band EQ and feedback controls
- Auxiliary stereo input with level control and 1/4” & 1/8” connectors
- Dual digital effects section, with independent channel & effects level
- D.I. output: balanced XLR outputs on each input channel and main mix
- Channel Mute to silence both input channels
- Headphone output
- Foot Switch input for remote muting of the input channels or Chorus, Flanger, and Slap Echo effects
- Two-way speaker design with built-in 10º baffle angle
- Fishman Loudbox Artist controls closeup
INSTRUMENT & MIC CHANNELS:
- Combination 1/4” & XLR input
- Shelving bass and treble
- Resonant-style midrange
- Notch filter (feedback control)
- Input gain with 10dB pad and clip indicator
- 24-Volt phantom power for condenser mics
- Reverb and Delay effects level
- Chorus, Flanger and Slap Echo on/off
- Phase switch (feedback control)
- Dedicated effects loop
Specifications
- POWER 120 watts, bi-amped
- DRIVERS 8” woofer (100W), 1” soft dome neodymium tweeter (20W)
- SPL 113dB SPL @ 1 meter
- SPEAKER BAFFLE 10º built-in tilt
- CONNECTIVITY Bluetooth® 4.0
- DIMENSIONS 13.5” H x 15.5” W x 11.5” D (343 mm) x (394 mm) x (292 mm)
- WEIGHT 25 lbs. (11.3 kg)
